Emerson R48-3500e rectifier module communication power module
Emerson R48-3500e rectifier module communication power module
We can provide a variety of used and new Emerson R48-3500e rectifier module, If you have other needs, please let us know the specific model
Product Details:
Product Description:
1.The efficiency is as high as 93%.           
2.Power factor 0.998;           
3.Input grid frequency: 45 ~ 65Hz;           
4.Working temperature range: -40 ~ +65 C;           
5.Rated output power: 5800W, power density as high as 0.813 W/cm3;           
6.Safety regulations: EN60950: 1992, UL1950;           
7.EMC: EN55022 Class B;           
8.Hot swap non destructive;
9.Rectifier module MTBF>57 hours
Product Feature:
* Emerson's high-efficiency rectifier module R48-3500e adopts non-destructive hot-swapping technology, and its output and input have soft-start units, so the output voltage of the system will not fluctuate when the module is swapped.           
* working temperature: -40°C~70°C          
* altitude: less than 2000m (2000m with upper power).           
* output power: 3500W (input voltage 176Vac~30Vac).           
* input voltage range: 85Vac~300Vac (single phase three wire system).           
* rated input voltage: 200Vac~250Vac           
* maximum static voltage without working time: 415Vac           
* input current: <20A @2900W/176Vac           
* starting current: <32A           
* rated input frequency: 50Hz/60Hz           
* output DC voltage range: 42V~58V           
* output DC current: 0A~65.5A           
* regulation accuracy: less than or equal to 0.5%.           
* load adjustment rate: less than or equal to 0.5%           
* voltage adjustment rate: less than or equal to 0.1%.           
* power factor: greater than or equal to 0.90 (@25%~50% rated output power).           
                        More than 0.90 (@50%~100% rated output power)          
                        More than 0.99 (@50%~100% rated output power)           
* efficiency: greater than or equal to 91%           
* over voltage protection: input under voltage protection point 80 + 5Vac input overvoltage protection point 305V + 5Vac           
* Output Overvoltage Hardware Protection Point: 58.5-59.5V (Output Overvoltage Software Protection Point 56V-59V can be set by monitoring)           
* module current sharing error: less than + 0.9A           
* cooling mode: forced air cooling.           
* safety standards: UL/EN/IEC 60950-2000           
* safety requirements: CE/UL/NEBS           
* outline size: 87.9mm (high) X85.3mm (wide) X272mm (deep)           
* module weight: ≤4kg
Product Detail:


 


A Free Consultation

You can contact us any way that is convenient for you. We are available 24/7 via fax, email or telephone.