banner
banner
banner_03
banner_04
PRODUCT
NOKIA Ericsson Alcatel/ Lucent Huawei ZTE Other Optical Module Equipment Cable Power module
OLT,XPON-HUAWEI CSHA SLA1 Hybrid control switching and timing board
OLT,XPON-HUAWEI CSHA SLA1 Hybrid control switching and timing board
Version Description The functional version of the CSHA CSHB CSHC is SLA1 Application CSHA CSHB CSHC boards function as system control, switching, and timing boards on OptiX RTN 910 NEs building Hybrid radio networks In this scenario, these boards also receive and transmit E1 STM-1 FE GE services The selection of CSHA, CSHB, or CSHC boards depends on desired port types and port quantities Figure 1 Application scenario of CSHA CSHB CSHC boards
Inquiry Now
Product Details:
Version Description
The functional version of the CSHA/CSHB/CSHC is SLA1.
 
Application
CSHA/CSHB/CSHC boards function as system control, switching, and timing boards on OptiX RTN 910 NEs building Hybrid radio networks. In this scenario, these boards also receive and transmit E1/STM-1/FE/GE services. The selection of CSHA, CSHB, or CSHC boards depends on desired port types and port quantities.
Figure 1 Application scenario of CSHA/CSHB/CSHC boards
NOTE:
IF boards shown in the preceding figure must be general-purpose IF boards or XPIC IF boards working in native E1+Ethernet mode or native STM-1+Ethernet mode.
Service boards shown in the preceding figure can be E1 interface boards, STM-1 interface boards, or Ethernet interface boards.
CSHA/CSHB boards must work in conjunction with STM-1 interface boards for receiving and transmitting STM-1 services.
To transmit IEEE 1588v2 packets through Ethernet ports on system control, switching, and timing boards, use CSHD/CSHE boards.
 
Functions and Features
The CSHA/CSHB/CSHC provides 4.2 Gbit/s packet switching, full time-division cross-connection, system control and communication, and clock processing functions. The CSHA/CSHB/CSHC provides FE/GE service ports, PDH/SDH service ports, auxiliary ports, and management ports.
Table 1 lists the functions and features that the CSHA/CSHB/CSHC supports.
Table 1 Functions and features that the CSHA/CSHB/CSHC supports
Function and Feature Description
CSHA CSHB CSHC
Basic functions Switching capacity Supports 4.2 Gbit/s packet switching function.
Cross-connect capacity Supports full time-division cross-connections (equivalent to 8x8 VC-4s) at the VC-12, VC-3, or VC-4 level.
System control and communication Manages, monitors, and controls the running status of the IDU, and works as a communication service unit between the NMS and boards to help the NMS to control and manage the NE.
Clock Clock synchronization at the physical layer Provides the system clock and frame headers for service signals and overhead signals for the other boards when tracing an appropriate clock source.
The traced clock source can be any of the following:
External clock
SDH line clock
PDH tributary clock
Radio link clock
Synchronous Ethernet clock
Clock protection Supports the following clock protection schemes:
Protection based on clock source priorities
Protection by running the SSM protocol
Protection by running the extended SSM protocol
IEEE 1588v2 Processes IEEE 1588v2 messages.
External clock port 1
External time port 1
DCN Outband DCN Supports a maximum of five DCCs. Supports a maximum of five DCCs. Supports a maximum of seven DCCs.
Inband DCN Supports the inband DCN function. The DCN bandwidth is configurable.
Network management protocols HWECC protocol Supported
IP protocol Supported
L2 DCN Supported    
SNMP protocol Supports query of NE alarms, performance events, and partial configurations using SNMP.
MPLS/PWE3 functions Supported
For details, see Table 2.
QoS functions Supported
For details, see Table 3.
Ethernet service functions Supported
For details, see Table 4.
SDH service functions Not supported Not supported Supported
For details, see Table 5.
PDH service functions Supported
For details, see Table 6.
Auxiliary ports and management ports NMS port 1
NMS serial port 1
NE cascade port 1
Orderwire phone port 1
Asynchronous data port 1
The transmission rate of the port is equal to or less than 19.2 kbit/s and the interfacing level complies with RS-232.
Synchronous data port 1
The transmission rate of the port is 64 kbit/s and its specifications comply with ITU-T G.703.
External alarm port Three inputs and one output
Outdoor cabinet monitoring port 1
The specifications of port comply with RS-485.
O&M Warm reset and cold reset Supported
In-service FPGA loading Supported
Board manufacturing information query Supported
Board power consumption information query Supported
Board temperature detection Supported
Board voltage detection Supported
Detection of indicators on the other boards Supported
Pluggable CF card Supported

A Free Consultation

You can contact us any way that is convenient for you. We are available 24/7 via fax, email or telephone.