Xinghe Da Technology Co., Ltd
Contacts：Jack Peng
Mobile：+86 18627553022
Whatsapp：+86 18627553022
WeChat： pengyi-changsha
E-mail：admin@chinaxingheda.com
Company address ：2506 Xidi Building, No. 8 Fenglin Third Road, Yuelu District, Changsha City, Hunan Province
OLT,XPON-HUAWEI RTN 910A OptiX Split-structured IP microwave transmission IDU equipment
Product Description
Network Application
The OptiX RTN 910A provides a generic platform for TDM Hybrid Packet Routing microwave transmission, meeting the backhaul requirements of various mobile networks The OptiX RTN 910A is highly inte
Product Details:
Product Description
Network Application
The OptiX RTN 910A provides a generic platform for TDM/Hybrid/Packet/Routing microwave transmission, meeting the backhaul requirements of various mobile networks. The OptiX RTN 910A is highly integrated microwave equipment, with one 1 U chassis supporting a maximum of six microwave links. The OptiX RTN 910A is mainly used at the access and aggregation layers. Figure 1 shows the microwave transmission solution provided by the OptiX RTN 910A. This solution is mainly used for base station service backhaul on 2G and 3G networks.
Figure 1 transmission solution provided by the OptiX RTN 910A
NOTE:
The OptiX RTN 910A supports a wide range of interfaces and service bearer technologies, and is therefore compatible with various backhaul networks. Specifically, packet services can be backhauled through TDM networks, and TDM services can be backhauled through packet networks.
The OptiX RTN 910A can provide a route microwave solution for LTE bearer networks. In this solution, the OptiX RTN 910A functions as a CSG and works with routers that function as ASGs and RSGs to provide end-to-end L3VPN services. The routers can be Huawei CX600s or other routers. Figure 2 shows the route microwave transmission solution provided by the OptiX RTN 910A.
The route microwave transmission solution can be used in end-to-end Layer 3 networking. When deployed for backhauling services from a multitude of eNodeBs, the solution simplifies VLAN planning, reduces broadcast traffic, and does not require much configuration modification on the transmission network when the wireless side changes. For details, see Feature Application (L3VPN).
Figure 2 Route microwave transmission solution provided by the OptiX RTN 910A
Components
The OptiX RTN 910A adopts a split structure. The system consists of the IDU 910A and the ODU. Each ODU is connected to the IDU 910A through an IF cable.
IDU 910A
The IDU 910A is the indoor unit for an OptiX RTN 910A system. It receives and multiplexes services, performs service processing and IF processing, and provides the system control and communications function.
Table 1 lists the basic features of the IDU 910A.
Table 1 Features of the IDU 910A
| Item | Description |
| Chassis height | 1U |
| Pluggable | Supported (CSHR boards are not pluggable.) |
| Number of radio directions | 2 to 6 |
| RF configuration mode | N+0 non-protection configuration (N≤6) Nx(1+0) non-protection configuration (N≤6) 1+1 protection configuration N+1 protection configuration (N≤5) XPIC configuration |
| Service interface type | Native E1 interface Smart E1 interface STM-1 optical/electrical interface FE optical/electrical interface GE optical/electrical interface GPON optical interface |
A Free Consultation
You can contact us any way that is convenient for you. We are available 24/7 via fax, email or telephone.